In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and techniques which you can use.
If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Make sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your dog facial mask way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are flat and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask because your pet security, you’ll need to do some sanding to make sure that it is safe on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.